advert
- Home
- CB Profile
- dirbart
OFFLINE
dirbart
0
2130
Activiteit
dirbart deelnemer geworden van een groep
What am I up to?
Sure, I know it has been quiet here. Most of it due to work currently consuming a lot of my time.
But I did not entirely abandon TRAX. Last few months I have been reading up on WebGL and did a lot of experiments to see how we can do TRAX in 3D. I am now at a point where I have decided to start working on TRAX 3 - or maybe it should be called TRAX 3D.
3D will not just be a view-able mode - the entire editor will be build on the 3D engine. It will still provide a 2D top down view that will largely provide the same experience as the current version, but it will be very easy to go into 3D perspective and have the same editor features as in the 2D view.
I am still working on the overall graphic style, I am not a big fan of the graphic style of the 3D views of most model railway design packages, I want to make it a bit more stylized.
Sure, I know it has been quiet here. Most of it due to work currently consuming a lot of my time.
But I did not entirely abandon TRAX. Last few months I have been reading up on WebGL and did a lot of experiments to see how we can do TRAX in 3D. I am now at a point where I have decided to start working on TRAX 3 - or maybe it should be called TRAX 3D.
3D will not just be a view-able mode - the entire editor will be build on the 3D engine. It will still provide a 2D top down view that will largely provide the same experience as the current version, but it will be very easy to go into 3D perspective and have the same editor features as in the 2D view.
I am still working on the overall graphic style, I am not a big fan of the graphic style of the 3D views of most model railway design packages, I want to make it a bit more stylized.
Dragaan68 liked this
Show older comments
8 Comments
Ark-Ivor I concur, the Contact Us page does seem to be broken. I have also been trying to get into the forum, but keep getting an error message "Client error: `POST http://translate.google.cn/translate_a/single?client=t&hl=en&dt=t&sl=auto&tl=en&ie=UTF-8&oe=UTF-8&multires=1&otf=0&pc=1&trs=1&ssel=0&tsel=0&kc=1&tk=724186.868260` resulted in a `400 Bad Request` response: " Your work here is most appreciated :)
Lees verder
Mango Rails sweet
Lees verder
Fedor The 3D version is now in a stage where I could use some testers. I now have implemented the basic track laying functions and I have improved on undo/redo/cut/copy/paste stuff.
Have a look over here: trax3d.com - you must register as a new user, since your account here does not sync to the new site yet.
Lees verder
KimSFX Thank you. I just got your email and remembered I had signed up a long time ago.
Lees verder
Vosselerachim Link aus Mail kopieren und im Browser eingeben war hilfreich
Lees verder
The newest tutorial has been addes: #2 - the basics... it replaces the old Basics tutorial.
kara and jorjur liked this
I have added a lot of NMRA Modules to the module list.
ClemsonTyger78 liked this
gan54 Buongiorno!! spero di impare molte cose sul fermodellismo!
The new TRAX Introduction tutorial is finished, now featuring the new interface:
Last week a lot of bugs were fixed, please keep sending whatever you think is broken!
- The Undo/Redo function is fixed, it now also allows to undo/redo table and object movement, and changing table points.
- The copy/paste function is repaired.
- 'New Start' is now working both on the canvas as on the tables.
- The help button in the editor is working again. Please note that it shows a pop-up. If your browser suppresses pop-ups, this one won't show. Save thing goes for the printer pop-up.
- The track attributes (bridges and tunnels) can be selected, they were hidden.
- Settings are being saved
- There were some problems with the colors and the legend. Now you can change colors, toggle between visible and invisible, and edit the names of the colors.
- Inserting parallel track now allows to change the distance using a spinner field.
- The Undo/Redo function is fixed, it now also allows to undo/redo table and object movement, and changing table points.
- The copy/paste function is repaired.
- 'New Start' is now working both on the canvas as on the tables.
- The help button in the editor is working again. Please note that it shows a pop-up. If your browser suppresses pop-ups, this one won't show. Save thing goes for the printer pop-up.
- The track attributes (bridges and tunnels) can be selected, they were hidden.
- Settings are being saved
- There were some problems with the colors and the legend. Now you can change colors, toggle between visible and invisible, and edit the names of the colors.
- Inserting parallel track now allows to change the distance using a spinner field.
Geli-04 Hallo, kann das Programm nicht starten. Während des Ladens kommt die Anzeige: Initiieren Sie die Schnittstelle
TRAX2 has finally been launched!
My apologies for the problem with the certificate, my fault. I lost it during the migration but luckily my provider recovered it. And we also moved the server to a faster platform. It now has SSD Disks which really speeds things up.
Enjoy the new TRAX!
My apologies for the problem with the certificate, my fault. I lost it during the migration but luckily my provider recovered it. And we also moved the server to a faster platform. It now has SSD Disks which really speeds things up.
Enjoy the new TRAX!
Show older comments
6 Comments
jackaaltjo Ja ik kan nu inloggen op de iPad pro. De remember me button werkt nog niet.
bogdanra Congrats!
ClemsonTyger78 Awesome, thanks again
captainpete3 Thanks and well done. Looking forward to mastering a new RR interface :-)
Hi all!
Welcome to the new TRAX website. Please join us testing it and let us know your findings in the forum. There is a special category called 'BETA TRAX2'
Welcome to the new TRAX website. Please join us testing it and let us know your findings in the forum. There is a special category called 'BETA TRAX2'
Vianen49, AnthonyDoes, and 8 others liked this
Bikebert I ‘cant submit any railtrack?
Gebruikersinformatie
dirbart
Netherlands
-